Flush Base Siphon Aquarium Drain

A drain to get as much water out of your aquarium as possible! The shallow base and small holes allows this to drain down to within a few millimeters of the bottom. The fitting on top will accept a 3/8 inch ID hose that you can run over the side and start the siphon. I have used it with a pump but you must use a self priming pump, or start the siphon first to get water in the pump if you need to. The holes are small enough to prevent anything big going inside but I wouldn't recommend using this is a tank with small substrate like sand etc. I printed with PETG and no supports and it came out nicely with no print issues.