Printables

Accessories

Flyer stand

by PetraF · Accessories

226 Downloads

15 Likes

1 Makes

Go to Model

Printed in PETG without support.
Time to print 6 hour and 20 minutes.
Printed on Prusa mini+

Category

Accessories

Source

Printables

Published

26.11.2023

Updated

26.11.2023

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PETG

Est. print time

6 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Flyer stand need supports when printing?

No supports needed for Flyer stand — it's designed to print clean off the bed.

How long does it take to print Flyer stand?

According to the design notes, Flyer stand takes approximately 6 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Flyer stand available in?

Flyer stand is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Printables.

Is Flyer stand free to download?

Yes, Flyer stand is available as a free download through Printables. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Flyer stand

Similar Models

Add to Collection