Thingiverse
Flying saucer
door gpvillamil
947
Downloads
927
Likes
21
Makes
A (mostly) parametrically defined flying saucer. Hollow dome allows for including a pilot figure, eg. octopus, Colbert, etc.
UPDATE (8/1/11): Updated v3 with a hinged hatch on the top dome for even more excitement. Depending on your machine, clearances on the hinge might need to be adjusted.
UPDATE (12/16/11): Uploaded two versions of the hatch with tighter clearances, it should clip in more solidly. V4 is snugger than V3, and V5 is the snuggest, with bigger pins. I usually use a heat gun to adjust the hinge so that the hatch closes properly.
UPDATE (8/1/11): Updated v3 with a hinged hatch on the top dome for even more excitement. Depending on your machine, clearances on the hinge might need to be adjusted.
UPDATE (12/16/11): Uploaded two versions of the hatch with tighter clearances, it should clip in more solidly. V4 is snugger than V3, and V5 is the snuggest, with bigger pins. I usually use a heat gun to adjust the hinge so that the hatch closes properly.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
