Slicer Discord
Fog Sail – 3D-Druckmodell von GrabCAD GrabCAD
STEP / IGES

Fog Sail

48 Downloads
8 Likes
0 Makes
Zum Modell
The idea is to plant a sail on land. First to Point an ancor into the Soil. Into the ancor Comes the mast. The lower Frame can be fixed while the upper Frame cam be lifted by rope. Between the two Frames can be two nets installed. The net may be attached like curtans with little rollers. As there is allways at least a Little wind while harvest time the sail will Point into the wind. The wind will also push the water into the back of the Attachement-rail into the bottles. As there is no Connection between the two Frames the sail will move and water Drops will move more quikly down down the net into the rails.
Kategorie
STEP / IGES
Quelle
GrabCAD
Veröffentlicht
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STEP, STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen