Thingiverse
foldable bottle opener
von Willcan2002
0
Downloads
2
Likes
0
Makes
I designed this bottle opener to use a 5p coin as it is the smallest British coin (1.8 mm thick with an 18mm diameter) although I am sure that other currency would work if you are not from the UK. the opener would fold into the handle with just enough friction to hold it securely.
HARDWEAR
I used is a bolt and nut I had lying around with the bolt baing 24.5 mm long and 3 cm diameter. I used an accompanying hex nut that was 5.5 across. but I am sure another bolt could be cut down or the hole drilled out a little larger.
I hope you enjoy and any feedback would be appreciated. (especially this time as development cost me 15p in 5p coins that can not be removed)
HARDWEAR
I used is a bolt and nut I had lying around with the bolt baing 24.5 mm long and 3 cm diameter. I used an accompanying hex nut that was 5.5 across. but I am sure another bolt could be cut down or the hole drilled out a little larger.
I hope you enjoy and any feedback would be appreciated. (especially this time as development cost me 15p in 5p coins that can not be removed)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
