Folding Window Crank V1

Overview: This is a folding window crank designed to replace the Caradco window crank. This aims to make your window more sleek and more convenient and compact. I designed this because the original crank was keeping my blind from going all the way down.

Supports: yes, tree supports on the crank body
Brim: no
Infill: 15%
Walls: 2
Layer Hight: 0.2

Assembly: To connect the body and base I used a small brass nail and hammer it through for a stronger friction fit but the provided pin works too. The pin will have to be cut to length after assembly. To assemble the handle I put the inner handle through the body then super glued the outer handle into the inner. rotate it while drying to keep it from getting stuck to the body. I recommend using graphite from a pencil between the handle and body before gluing to keep it from getting stuck when cranking open a window.

V2 coming in the future when i get better modeling skills.