Folgertech i3 2020 18mm Inductive sensor mount

This is primarily an inductive sensor mount for auto bed leveling/tramming. Created for the Folgertech i3 2020 Prusa style printer. But should work with any similarly configured machines.

Uses an 18mm diameter probe, and results in the Z Probe being offset 30mm in the X-Axis from the nozzle which is useful when setting up your firmware settings.

Depending on your resulting print, you may have to clean up the sensor mount hole to allow the sensor to fit in cleanly. Ideally, you do not want to have to screw the sensor in, but allow the top and bottom nuts to do their job securing the sensor. And take it from me, be careful with the orange/blue end caps as they really like to break free and once that happens the sensor is broken.

I have also added mounting points for fans or whatever the case may be. Four holes on the left hand side, 3mm in size and spaced 10mm apart. And another four holes along the front (also 3mm, also also spaced 10mm apart).