Thingiverse
Foosball Covid screen
von Coat
2
Downloads
3
Likes
0
Makes
A Covid / Corona shield for your foosball / tablesoccer -table.
Clean the handles and wash your hands before and after.
Measurements :
Our table has a length of 140 cm.
I used an acrylic sheet of 100x70 cm x 2mm (old pictureframe from Ikea). It is a little thin but it works.
The wooden rods are 18x23 mm (innerspace parts = 19x24mm), have a length of 34 cm and goes up at an angle of 60 degrees.
Calculating your rod-length (see picture):
If you have a different table- or sheet-size, calculate the distance from the edge of the table to the edge of the centered sheet (A). Double that length and substract 6 cm.
I assume that the rod is cut straight (resulting in the 6 cm to substract).
Rod-length = 2xA - 6
It is adjustable so it is not that precise
example: table = 140, sheet = 100 ==> A = (140-100)/2 = 20
Rod-length = 2xA - 6 = 2x20 - 6 = 34
Happy foosballing :)
Ps. Stp-files are included.
Clean the handles and wash your hands before and after.
Measurements :
Our table has a length of 140 cm.
I used an acrylic sheet of 100x70 cm x 2mm (old pictureframe from Ikea). It is a little thin but it works.
The wooden rods are 18x23 mm (innerspace parts = 19x24mm), have a length of 34 cm and goes up at an angle of 60 degrees.
Calculating your rod-length (see picture):
If you have a different table- or sheet-size, calculate the distance from the edge of the table to the edge of the centered sheet (A). Double that length and substract 6 cm.
I assume that the rod is cut straight (resulting in the 6 cm to substract).
Rod-length = 2xA - 6
It is adjustable so it is not that precise
example: table = 140, sheet = 100 ==> A = (140-100)/2 = 20
Rod-length = 2xA - 6 = 2x20 - 6 = 34
Happy foosballing :)
Ps. Stp-files are included.
Coat veröffentlicht auch auf
73 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
