For All Maker (HueForge)

Project: IMG_8287.JPGPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2.1mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Paramount 3D Harajuka Pink Transmission Distance: 5.5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite Aqua Blue Transmission Distance: 2.5 PETG JAYO White Transmission Distance: 6This print uses 5 unique filaments !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Harajuka Pink At layer #6 (0.56mm) swap to Yellow At layer #10 (0.88mm) swap to Aqua Blue At layer #11 (0.96mm) swap to White for the rest.