Foregrip - Picatinny

Picatinny Rail Foregrip with Threaded Insert sized for 2x AAA batteries & TPU O-Ring Printed in PA6-CF - 99% Gyroid Infill.4 Horizontally printed plugs for added strength. Hardware -38mm #10 Socket Head Cap Machine Screw (35/36mm would fit best) *38 was what ace hardware had in stock.#10 Hex Nut with matching threadM5 hardware will also work for a tight fit. For added strength (Pictured in photos) *Fumes from soldering plastic are toxic, proceed with caution at your own risk. - Bend a paperclip into shape picture x2 and x2 mirrored copies. - With Soldering Iron (in a well ventilated area, preferably with a vacuum ventilation system) hot press melt into front and back face ~1mm or so in from picatinny mounting < & > (location pictured). - Ran soldering iron across < & >. (location picture, weakest point of print) - Break off/cut a 3&#34; or so chunk of PA6-CF filament and melt over the paperclips as well as on top of the 4 Hex plugs pressed into the top. See MLOK Version -https://makerw