Four-Way Splitter Side Spool Mount

I recently installed Mdesign's Side spool holder for P1S, X1C on the left side of my P1s only to realize that it left no room for jusutu's 4-in-1 PTFE Adapter, without running PTFE tubes like a madman behind the machine. So I took a projection of the magnet pad of jusutu's 4-in-1 adapter and combined it with the footprint for the two top M3 screws on Mdesigns side spool holder, to create this mount, which provides a home for the 4-in-1 adapter. BOM:Printed part5pcs 6x2mm magnets (6x3 mm version now available!)2pcs M3x12 Socket Head Screws.Assembly:Unhook the PTFE feeding from the AMS, and remove the coupling from the tube.Press the magnets into the mount (use glue if you want). Note: Make sure the magnets match the orientation of the magnets in the 4-in-1 PTFE Adapter!Install the mount into the top back of the side spool holder and the X1*/P1* using the two M3 screws.Slide the 4-in-1 adapter into place onto the magnet pad on the mount and slide the PTFE tube from the printe