Fox Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6 Swap Instructions: Start with Black WARNING: This Slider is at the same Layer as the Next Slider At layer #13 (1.12mm) swap to Gray At layer #13 (1.12mm) swap to Gray At layer #20 (1.68mm) swap to White for the rest.