Foxtrot Rocket

This rocket i made up and built from scratch, I guess if i had any sort of inspiration it would've come from the Saturn1B rocket with its individual tanks but this rocket is quite different.

You print the Foxtrot-Rocket-Motors.STL for its base as well as the Mid-Transition. These 2 piecess make up the lower part of the rocket, you can make these any dimension you want,

It requires you to run a BT-50 (24mm) Central Core tube up the middle, accomodating a D/E motor. You can print the "24mm-EngineMount-Stop" for your ring to slide in for the Motor Stop unless you have a cardboard to use. An E motor is 95mm long and a D motor is 70mm long, so you will need to put glue on this ring and slide it in the bottom end of the BT-50 Tube. Make sure you allow for a Motor Retainer to protrude at the bottom end of the tuibe and i suggest that you Build this to accomodate an E motor, you can always use a D motor with a spacer on top, this way you have more options depending on wind con