Slicer Discord
FPV arrow – Modelo 3D imprimible de Thingiverse Thingiverse

FPV arrow

39 Descargas
39 Likes
0 Makes
Ver Modelo
well i had an extra camera laying around so i thought could o make an FPV arrow for archery and well here it is it uses an Ultra Micro FPV Camera and Video Transmitter from horizon hobby's and a 150mAh 1S 3.7V 45C LiPo Battery and a good old rubber band to hold the two half's together the arrow is an 1/3 inch shaft or 9.5 mm. due to my camera going on the frits i had to get a different camera.

WARNING this can damage your camera, arrow and even bow my camera only lasted 3 shots before the case broke and the camera died. and it will change the flight of the arrow. use at your own risk.

links below for both cameras and battery
Camera
https://www.horizonhobby.com/first-person-view-%28fpv%29--1/fpv-cameras--1/ultra-micro-fpv-camera-and-video-transmitter-spmva1100

Battery
https://www.horizonhobby.com/airplanes/batteries/150mah-1s-37v-45c-lipo-battery-eflb1501s45

second camera
https://www.ebay.com/itm/3-IN-1-FPV-Camera-System-including-Camera-Monuting-Bracket-for-BumbleB-W
Fuente
Thingiverse
Lo que necesitas para imprimir: Principiante Baja confianza
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección