Thingiverse
FPV Camera Mount - HS1177M
di drewprice
51
Download
22
Likes
0
Makes
Camera Mount for the HS1177M FPV Camera
This camera mount is designed to hold the HS1177M and to be printed with TPU. The Camera is held in by pressure from the ring around it. I offer three different angles, sorry they are all pretty aggressive (30-40degrees) but that's how I fly / race.
Anything above 40 degrees you might as well use the regular HS1177 camera as this is so long.
I hold it to the frame with just double sided 3M tape. It works well for a while, eventually you need to apply new tape though.
Once again, this is to be printed with TPU. If it is printed with ABS/PLA it won't hold the camera well.
This camera mount is designed to hold the HS1177M and to be printed with TPU. The Camera is held in by pressure from the ring around it. I offer three different angles, sorry they are all pretty aggressive (30-40degrees) but that's how I fly / race.
Anything above 40 degrees you might as well use the regular HS1177 camera as this is so long.
I hold it to the frame with just double sided 3M tape. It works well for a while, eventually you need to apply new tape though.
Once again, this is to be printed with TPU. If it is printed with ABS/PLA it won't hold the camera well.
drewprice pubblica anche su
28 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
