FPV Drone Stand

This is a universal FPV drone stand for frame without props guards.PrintingIt can be printed without support if your printer can do good overhangs. And it is direcly in the good orientation for printing. DimensionsThis stand is designed for the moz7HD but it can be easily rescale has you want. The inner distance between poles is 55.5mm as presented in the image below.Let's say you want it for a frame that the nose is 30mm wide (35 with play). You get a 35/55.5= 0.63. So you can scale it to 63% in your slicer. CommentsIf other sizes are needed you can write me directly ! Check my page for more designs :)