FPV Gate - Vertical Double Gate (MultiGP Style)

Another design in my "low weight, little space, one person build" series.

A big advantage of these "flimsy" gates is, that the gate as well as the drones don't suffer (most of the time) by impact damage due to the gradual force degeration on impact).

They are not the cheapest but folded up the smallest and lightest I know of.

Parts of this project can be reused for other gates as well (glass fibre rods, fabric, paracord).

For building this project you'll need:
- 14x M6x30mm (or longer) hex bolts and wing nuts
- M2-M3 steel cable and a appropriate fixing piece (alternatively 3-4mm paracord, if the inner diameter of the glass fibre rods is big enough, you'll need some kind of tool to route it trough the rods).
- Glass fibre rods (8,5mm diameter): 3x 1,5 meter (each consisting of 3 segments)
1x 4 meter (8 segments for the top arc)
the rod assemblys need to have a connector piece on both ends. This