Slicer Discord
FPV Racer "Pickup" – 3D printable model from MakerWorld MakerWorld
Robotics

FPV Racer "Pickup"

2 Downloads
1 Likes
0 Makes
Go to Model
Added new top and bottom part (v5). Bottom is now solid, better to fly in wet or snowy conditions. Also USB connector hole is added to the top cover.FPV Racer "Pickup" first flight: https://youtu.be/MDNl5mtrBoITesting cheap Chinese camera Xiaomi Yi: https://youtu.be/tbeof8yNsVICruising in the backyard https://youtu.be/57ki90j5rQYHardware list:Motor 1806 + 16A esc + probs: http://www.hobbyking.com/hobbyking/store/__82987__DYS_BE1806_2300KV_Combo_set_with_16amp_Opto_Speed_Controllers_X_4.htmlFC: http://www.hobbyking.com/hobbyking/store/__69348__AfroFlight_Naze32_Acro_FunFly_Controller_EU_Warehouse_.htmlPDB: http://www.banggood.com/Matek-Micro-PDB-With-5V-12V-Dual-BEC-Output-For-FPV-Multicopter-p-1031896.htmlLipo : http://www.hobbyking.com/hobbyking/store/__26704__Turnigy_nano_tech_1300mAh_3S_45_90C_Lipo_Pack_UK_Warehouse_.html?strSearch=1300Vtx : http://www.hobbyking.com/hobbyking/store/__63114__SkyZone_TS5823_5_8GHz_32CH_A_V_200mW_Mini_FPV_Transmitter_v2_.htmlCamera : <a href="http://ww
Category
Robotics
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
TPU
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection