FPV Racing Drone Hueforge

FPV Racing Drone Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.7mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Bambu Lab Basic Cyan Transmission Distance: 8 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Cyan At layer #12 (1.04mm) swap to Blue Gray At layer #13 (1.12mm) swap to Red At layer #21 (1.76mm) swap to Yellow At layer #26 (2.16mm) swap to Jade White for the rest.