Thingiverse
FPV tripod battery mount
von Shikra
4
Downloads
1
Likes
0
Makes
This is a battery mount that can be used to attach lipo batteries to most tripods for use with FPV ground-stations.
A battery strap can be used to hold the battery in place - or if preferred Velcro can be used.
Assembly:
The two parts can be joined using 6 * 10mm countersunk screw. I use "10mm M2.5 countersunk machine screws" which are available really cheap on ebay and the holes are designed for this size so they can be screwed straight in.
Installation:
The assembled mount is fixed in position on the tripod leg using double sided foam tape.
2 * 5mm cable ties are used to hold the mount firmly in place.
Files:
STL includes a standard and a smoothed version.
Sketchup design files are included for your own modifications.
Info:
I use a 3S 3000-5000mAh lipo
I print this at 25% with 3 shells as the ground-station is heavily used.
A battery strap can be used to hold the battery in place - or if preferred Velcro can be used.
Assembly:
The two parts can be joined using 6 * 10mm countersunk screw. I use "10mm M2.5 countersunk machine screws" which are available really cheap on ebay and the holes are designed for this size so they can be screwed straight in.
Installation:
The assembled mount is fixed in position on the tripod leg using double sided foam tape.
2 * 5mm cable ties are used to hold the mount firmly in place.
Files:
STL includes a standard and a smoothed version.
Sketchup design files are included for your own modifications.
Info:
I use a 3S 3000-5000mAh lipo
I print this at 25% with 3 shells as the ground-station is heavily used.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!