What you need to print this:BeginnerMedium confidence
Why?
no supports · 0.20mm layers
Support-freeSingle piece
Supports0/3
Assembly0/3
Settings1/3
Bed size0/3
Post-process0/3
Printer
FDM / FFF
File format
STL
Material
Layer height
0.2 mm
Est. print time
3 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Fraction Tiles Tray need supports when printing?
No supports needed for Fraction Tiles Tray — it's designed to print clean off the bed.
How long does it take to print Fraction Tiles Tray?
According to the design notes, Fraction Tiles Tray takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Fraction Tiles Tray available in?
Fraction Tiles Tray is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Fraction Tiles Tray free to download?
Yes, Fraction Tiles Tray is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
Did you print this model? Sign in and share your make!
Thingiverse
![[Customizable] Fraction Learning Pie Chart](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSefe7fe9a1ed0a0%2Fdesign%2F9725a6c7dc5abb20.jpg&w=400&h=300)