Frame Compatible - Junk in Space

This version of the model is has been adjusted and upsized in conjunction with the collaboration with TheCraftyMaker's Hueforge Wall Mountable Frame. The frame is NOT included in this download, please visit TheCraftyMaker's profile to download the frame. This print is now 210mm x 150mm, slides in perfectly into the frame, and you can now have a wonderful piece of junk hanging from your wall in NO TIME! This is a completely print in place model, no supports needed. The print instructions are below.For the version compatible with the shadow box frame, download the models titled 'FalconForFrame'. Print Instructions:Print the HueForge print (0mm - 2.08mm) at 100% infill.The Millennium Falcon portion of the print (2.08mm - 109mm) should be printed at 10% infill, with 3 wall loops, 3 top and bottom surfaces. I used a layer height of 0.16mm.You can achieve this by using a layer height modifier in your slicer to modify layers 2.08mm-109m.You do not need any supports for this print.I used Burnt