FRC RSL mount V2

RSL mount for FRC robots. Takes 10-32 hardware to fasten the caps and mount the light to the robot. Boxes have a large hole for the RSL, a slot at the top for a stack light (found at https://www.thingiverse.com/thing:5856845) and a hole at the bottom large enough to run several wires and a connector through.

Included are:
- Caps for the boxes
- Box for mounting at 30 deg.
- Box for mounting vertically

Special instructions:
- The boxes have a flange for mounting the cap with 10-32 bolts. This requires 0.5" 10-32 bolts as well as the holes in the flange must be tapped with a 10-32 tap. No drilling should be required for this.

For use with Allen Bradley 855PB-B24LE522 (https://ca.wiautomation.com/en/allen-bradley/general-automation/855PBB24LE522?gclid=Cj0KCQiAorKfBhC0ARIsAHDzslt2JRmlLklkmv7tk2l5dTvx7jNsUai3g8vp9eotTFKoe4q6U62P3rIaAryHEALw_wcB) or Robot Signal Light am-3583 (https://www.andymark.com/products/robot-signal-light)

As seen on FRC team #5885. Go Wiredcats!