Freddy

by Brammerdk

6 Downloads

17 Likes

3 Makes

Download Model

freddy hueforge horror nightmare

Just Freddy. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.5x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.96mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mm Filaments Used: PLA 3dpower black Transmission Distance: 0.3 PLA Generic red Transmission Distance: 0.3 PLA Filafarm Cream Transmission Distance: 2.8 PLA Filafarm White Transmission Distance: 1This print uses 4 unique filaments Swap Instructions: Start with