FreeDeck Case

This is my version of a Case for the FreeDeck v1.1 and v1.2.

I could only test the version for the pcb v.1.1, if you printed version 1.2 please send me your feedback.

If you are going to make it, you need:
* 1x top (fitting your pcb version)
* 1x bottom (fitting your pcb version)
* 4x M3x8 screws.

Check the Pictures for suggested print orientation.

For printing I used two different slicers to create the g-gode:
* I used Cura for the bottom since I can get better overhang support with the provided tree support.
* I used PrusaSlicer for the top since it makes printing multi material/color with a single extruder super simlpe.

I noticed that the 1306 OLED displays vary in the size of the pcb they are mounted to, depending on the seller/manufacturer. I tried to make space for that in my design, but if you can't get it to work you may need to file off the 4 edges of display pcbs (see picture) close to the corners of the case . *This is not going to harm the function of