freezer hueforge

Project: freezer hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #080a0d PLA BambuLab Black Transmission Distance: 0.3 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Indigo Purple At layer #17 (1.44mm) swap to Blue Gray At layer #21 (1.76mm) swap to White for the rest.