Slicer Discord
Fridge Magnet – 3D-Druckmodell von MakerWorld MakerWorld
Other House Models

Fridge Magnet

39 Downloads
34 Likes
23 Makes
Zum Modell
ErgonomicSupport-free (though I recommend using an inner brim)Pressed-fit, no glue neededRecessed very slightly so the magnet, once inserted, does not come in contact with the item being held, or the fridge, to avoid scuffing/scratching. Only the plastic touches. Be sure to press the magnet all the way in.Fidget toy; if you put two together so that the magnets attract, it can be neat to play with.There are two STLs, one for a tight fit and the other a little less tight that could use some glue.Boost MePlease boost if you like it! Thank you!I used the following magnets:https://theclassroomstore.com/products/Button_Magnets?option=31293&srsltid=AfmBOorTRh4MqyMuqQW5dvw1DxvtzyuJ3RJnApyVm70qs1lBgZEhP3HA3aE&gQT=1 ProMag Ceramic Magnets 19mm I prefer these as they're cheap and just strong enough to work well, but not so strong that they hurt when they pinch your skin.
Kategorie
Other House Models
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

4 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen