Thingiverse
FritzBox 7240 wallmount adapter
3
Downloads
3
Likes
0
Makes
This is a wallmount adapter for the AVM FritzBox 7240.
It utilizes the holes designed for hanging the device on the wall.
This adapter may fit on other models from the 7200 series or similar devices with a 100mm hole distance.
The screw hole diameter is 7mm (fitting for 6mm woodscrews).
You should print this model with small supports for the pins/protrusions so they come out clean and without droop.
DO NOT use too much pressure while sliding the pins in/out or they will snap off. They are supposed to be a tight fit.
The SketchUp file is included with the download if you wish to adjust this model.
It utilizes the holes designed for hanging the device on the wall.
This adapter may fit on other models from the 7200 series or similar devices with a 100mm hole distance.
The screw hole diameter is 7mm (fitting for 6mm woodscrews).
You should print this model with small supports for the pins/protrusions so they come out clean and without droop.
DO NOT use too much pressure while sliding the pins in/out or they will snap off. They are supposed to be a tight fit.
The SketchUp file is included with the download if you wish to adjust this model.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
