front display mount for GeeTech i3

A pair of brackets to mount the display of a GeeTech i3 printer at the front, like a original Prusa i3.

Apart from the improved stability when using the input knob, this also removes the screws from the top of the frame, and cable chains should work smoother, especially for high prints.


This requires two M10 nuts, and you should use some washers. If it’s too far to the hardware store, or too late in the evening, you can try a nut from this [screw library](https://www.thingiverse.com/thing:8796). I’m not sure, but you may need slightly longer M3 screws¹ than those used for the top mounting, so you may have to go to the hardware store after all. Or rummage through the screws left from building the thing up in the first place.

In the pictures the printer is resting on my [inner tube feet](https://www.thingiverse.com/thing:3128601).

It should be easy to adapt this to other printer and display sizes by changing the values at the top of the main `scad` file.