Frozen - Elsa Hueforge

The example in the photo is printed at 50% of its size. L'exemple en photo est imprimé à 50% de sa taille. Project: Frozen 2.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x212.1mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 0.5 PLA BambuLab Basic White Transmission Distance: 5 PLA Elegoo Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #8 (0.72mm) swap to White At layer #12 (1.04mm) swap to Black At layer #14 (1.2mm) swap to White At layer #16 (1.36mm) swap to Red At layer #17 (1.44mm) swap to White for the rest.