FT-5 Adjustable Z Endstop

* No drilling of your melamine parts are required for this model, it used an otherwise unused CNC mounting hole for the adjustment bolt.

This is an adjustable z axis end stop modification for the Folgertech FT-5. The large end stop piece is secured by 2 bolts on the Y axis cable chain mount, and 1-2 bolts around one of the z axis smooth rods depending on the model you download. This piece is rock solid when installed.

* Note - You will need to swap the shorter bolts from the cable chain mount with the longer bolts used to secure the z axis switch.

Adjustment bolt assembly from bottom to top...

M3 40mm bolt (Shorter may work)
2mm Printed Washer
Spring (I used one from a click pen)
2mm Washer Insert (Insert facing up)
*Insert through underside of unused CNC mounting hole
Nut Capture
M3 Nut
Bolt Foot

If you have any questions or suggestions for improvements please let me know.

Happy printing!

*Update 01/26/17 - Some people have had problems with fitment using t