Thingiverse
FT Battery Tray
par Dayve
97
Téléchargements
51
Likes
0
Makes
This is inspired by the [FT Elements battery tray](http://store.flitetest.com/ft-elements-battery-camera-mount/). It was designed to fit the slots in the Sea Duck plans. I assume it will fit wherever the FT Elements tray is called for.
Length: 126mm
Width: 65mm
Thickness: 2mm
Weight: 16g
The original version only supports fairly narrow battery straps. The "big slots" version of the STL file will accept [3/4" battery straps](http://www.banggood.com/5-PCS-Eachine-Battey-Tie-Down-Strap-22_3cm-p-1029680.html?p=BW081525678892015099).
The holes cover the same area as the outer holes on the FT Elements battery tray. The wider slots in both trays are perfect for either single or double 2200mAh packs (as shown in the sample images).
Length: 126mm
Width: 65mm
Thickness: 2mm
Weight: 16g
The original version only supports fairly narrow battery straps. The "big slots" version of the STL file will accept [3/4" battery straps](http://www.banggood.com/5-PCS-Eachine-Battey-Tie-Down-Strap-22_3cm-p-1029680.html?p=BW081525678892015099).
The holes cover the same area as the outer holes on the FT Elements battery tray. The wider slots in both trays are perfect for either single or double 2200mAh packs (as shown in the sample images).
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
