FTO twisty puzzle

This is a rubiks FTO cube i designed so that you too can print it. features:sticker less cubeeasy to printsome sanding required for smoothest turning (recommended but not necessary)magnetic (optional)only 8 3mm screws/bolts needed8 sides and colours to print: print each piece as it says to on the file in 8 different colours the core and center's colours do not matter.i recommend PLA or ABS to print. . 0.4mm nozzle. print so that the least support possible is used . enable supports. any infill density will work to assemble:glue all corners and edges together but be very careful not to duplicate pieces or create pieces that dont even exist e.g. a white and yellow edgesand pieces (if necessary) so that they rotate smoothly around one another it should be clear when you have sanded enoughscrew center pieces into the center leaving one so that assembly is easiermagnetic step (optional) place 96 4mm magnets into each hole so that they attract and repel correctly make sure your confident