fubuki

Project: fubuki 4!.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x393.22mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Tough Pine Green Transmission Distance: 1.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Pine Green At layer #11 (0.96mm) swap to Red At layer #13 (1.12mm) swap to White for the rest. Boost Meboost for more plz =D