Thingiverse
Fuel pump battery box
by Coopznz
5
Downloads
3
Likes
0
Makes
Grab some alloy, a decent fuel container and strap this to the side, the pump I used was this one here
https://www.aliexpress.com/item/1451869042.html?spm=a2g0s.9042311.0.0.27424c4dJ6Zvzi
container was from here
https://www.supercheapauto.com.au/p/sca-sca-2-stroke-jerry-can---5-litre/326363.html#q=fuel+container&sz=12&start=24
1 slot with holes will take an aluminium plate tapped to mount on container
2 hole on top is the vent return to the tank
3 hole on side is for the fill tube storage, it has a slightly bigger tube glued inside the hole
4 arms allow you to wrap up the nylon fill tube
5 this setup is for methanol fuel but could be used for anything
https://www.aliexpress.com/item/1451869042.html?spm=a2g0s.9042311.0.0.27424c4dJ6Zvzi
container was from here
https://www.supercheapauto.com.au/p/sca-sca-2-stroke-jerry-can---5-litre/326363.html#q=fuel+container&sz=12&start=24
1 slot with holes will take an aluminium plate tapped to mount on container
2 hole on top is the vent return to the tank
3 hole on side is for the fill tube storage, it has a slightly bigger tube glued inside the hole
4 arms allow you to wrap up the nylon fill tube
5 this setup is for methanol fuel but could be used for anything
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!