Full Frame HSW

I didn't like the existing framed HSW, so I designed a full-frame option in Fusion 360. It's a remix of the legendary Rosťa model, and everything is compatible. I personally printed it in Prusa ABS because I had a few unused spools lying around. But it should work fine with PLA, PETG, or ASA as well. I organized and labeled every plate - don't forget that it's printed upside down. Therefore, the labels refer to where the pieces will be once finished and assembled. TroubleshootingWeak adhesion:PLA: Remove the top glass and open the door. Switch off the auxiliary fan (the big one on the left side).PETG: Make sure your filament is dry, use a 5mm brim with 0.05 gap.ABS or ASA: Print with a 10mm brim, 0.05 gap, using Bambu liquid glue stick.Stringing:Make sure your filament is dry (weigh the spool, then dry in oven, reweigh - repeat until weight remains constant).Slow down the speed for the outer wall. The profile is too big for for A1 mini.