full printable old style shelf

Hi!

This is an older project from me but the first one on Thingiverse from me. I hope you will like it.

Please print "sample" file first to check the connections. If necessary, the "horizontal expansion" setting must be changed in slicer for the correct connection.

You will need some screws to fit the parts together:

M3,5x20mm - 30pcs
M3,5x16mm - 35pcs

Something like this:
https://www.aliexpress.com/item/1005004463084507.html?spm=a2g0o.store_pc_allProduct.8148356.7.523e4267nfZGr6&pdp_npi=2%40dis%21EUR%21%E2%82%AC%200%2C05%21%E2%82%AC%200%2C05%21%21%21%21%21%402103241d16736972430814145e7c59%2112000029255252522%21sh

Assembly instructions added, but I think it will work without it. Just don't put a long screw where a short one is needed.

Some items require a small support. If the calibration is good, everything will fit nicely. Otherwise, a little sanding is required.

Final dimensions:

370mm width, 390mm height, 140mm depht

Good printing!