Fully Gaming Computer - With Interchangable Parts

MembershipWould you like to sell this model in your shop? Take a look at our Commercial LicensesNew version coming this year. See my community post for more information. 3D printed Parts:RTX 4090 Founders Edition. NVME SSD. AMD AM5 CPU. AM5 Motherboard. Heatsink for SSD. 2x UGLY RAM ram without a heatsink. 2x RGB RAM.“360mm” watercoolerCasePSU Parts needed:16* BT2x8 Socket Head Cap Self Tapping Screws (AA019)24* BT2.6x8 Socket Head Cap Self Tapping Screws (AA004)2* 8x2mm round magnet (not needed but recommended for a nice feel when putting the cpu in the socket) (CA005) The printer will automatically pause on the cpu and motherboard for you to put a magnet inside, after putting it in press resume. Assemble the aio:Do this before installing it to the motherboard.Align the tubes with the holes on the pump head and radiatior. Put a piece of filament through the hole to fasten it, and cut the filament. Installing the aio:Screw the pumphead from the back of the motherboard with the BT2.6x8