Thingiverse
Fashion
Zum Modell
Functional Cobra Buckle
390
Downloads
295
Likes
3
Makes
This is a functional prop Cobra Buckle for cosplay costumes with 50mm webbing.
----Not for climbing or safety use---
Print out in separate parts and glue them together to get a nice outer finish, your build surface will have an effect on this. Glass/kapton tape for gloss or blue painters tape for matte.
The holes on this are modified for the tolerances on an FDM printer with 0.4mm nozzle 0.3mm layer height in PLA. Print time 1hr 15m, 8540mm filament.
There are two options for the tongue piece, one with a 5mm bar and the other with no bar so you can add your own cut out for a metal rod.
----Not for climbing or safety use---
Print out in separate parts and glue them together to get a nice outer finish, your build surface will have an effect on this. Glass/kapton tape for gloss or blue painters tape for matte.
The holes on this are modified for the tolerances on an FDM printer with 0.4mm nozzle 0.3mm layer height in PLA. Print time 1hr 15m, 8540mm filament.
There are two options for the tongue piece, one with a 5mm bar and the other with no bar so you can add your own cut out for a metal rod.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
