Funingna Twins

by 冷鸢-浮雕照片制作

3 Downloads

1 Likes

0 Makes

Download Model

Genshin Impact hueforge Lithophane Photo

芙宁娜双生打印设置：使用100%填充，0.08层高，0.16首层打印开始打印使用黑色在#4 (0.4mm)切换成深蓝在#7 (0.64mm)切换成浅蓝在#8 (0.72mm)切换成白色材料（PLA/PETG）二者即可PETG JAYO Black Transmission Distance: 0.3PETG PolyLite Azure Blue Transmission Distance: 5PETG Kexcelled Lake Blue Transmission Distance: 5PETG JAYO White Transmission Distance: 6不同的耗材会引入色差 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm PETG JAYO Black Transmission Distance: 0.3PETG PolyLite Azure Blue Transmission Distance: 3PETG Kexcelled Lake Blue Tran