Thingiverse
Funnel Customizer
by aaalberto7
4.2k
Downloads
3k
Likes
10
Makes
This is a customizer to generate funnels parametrically.
Version 8.6 available.
Now the funnels can have an offset and/or angled spout for hard to reach filling jobs.
Although it is a remix (thanks Salvador Richter), it expands the original project substantially.
To all those who send me $ tips: thank you so much!
It's really rewarding to know that my work is useful to you and appreciated.
Customize the funnel with the following parameters:
***Size and shape***
- **diameters**: external diameters at three locations (top, middle, bottom);
- overall **height**;
- **wall** thickness;
- **neck ratio**: the higher the parameter the longer the "neck" of the funnel. At 1, the neck is one half the overall length, at 3 the neck is 5/6 of the overall length;
- **squish ratio**: sometimes you need funnel with a "squished" elliptical section. (if >1, the "diameters" are the major axes of the ellipse);
- **offset spout**: moves the spout from the center to the edge of the fu
Version 8.6 available.
Now the funnels can have an offset and/or angled spout for hard to reach filling jobs.
Although it is a remix (thanks Salvador Richter), it expands the original project substantially.
To all those who send me $ tips: thank you so much!
It's really rewarding to know that my work is useful to you and appreciated.
Customize the funnel with the following parameters:
***Size and shape***
- **diameters**: external diameters at three locations (top, middle, bottom);
- overall **height**;
- **wall** thickness;
- **neck ratio**: the higher the parameter the longer the "neck" of the funnel. At 1, the neck is one half the overall length, at 3 the neck is 5/6 of the overall length;
- **squish ratio**: sometimes you need funnel with a "squished" elliptical section. (if >1, the "diameters" are the major axes of the ellipse);
- **offset spout**: moves the spout from the center to the edge of the fu
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
