Thingiverse

Funnel

by dzc

1 Downloads

1 Likes

0 Makes

Needed a funnel for some liquid soap pour so quick F360 design and about 2h print time.
Printed in black PLA , no infill no support .
Wall thickness is 1.6mm

Funnel

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Funnel need supports when printing?

No supports needed for Funnel — it's designed to print clean off the bed.

How long does it take to print Funnel?

According to the design notes, Funnel takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Funnel available in?

Funnel is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Funnel free to download?

Yes, Funnel is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Funnel

Similar Models

Add to Collection