Fury 227 - Quadcopter

Dear nerds, this 227 frame has been designed for a mixed use between long range and free style. The front arms are foldable, while the rear arms are fixed.

I recommend printing all the components at a height of 0.3 -0.2 mm layer. The infill of the arms must be 100%, while for the other pieces it can go down to 50%. The recommended plastic is PLA graphite.

During printing, two neodymium magnets 22x5x3mm must be inserted inside "front_arm_cover_2", two other magnets of the same size must be inserted under "front_arm_cover".
The 4 screws holding the arms are M4 15mm, all other holes are for M3 screws.

You can follow his montage on Youtube:
https://youtu.be/F8BaC8S9jHU


-------Update 15/05/2021-------

All components have been updated.
The profiles for the arms and the center frame have been added.
I added some things to protect the engines.
I added bigger arms to fit bigger motors.
I added a support for the camera.
The angle of the rear arms has been increased to acc