G26 Glock Replica

G26 glock replica. Fully equipped with a functioning slide, slide lock, mag and its catch. You will need 2 springs (9.1x34.9 for the slide, goes on the pin and a 7.14x19.05 spring for behind the trigger) and probably a metal rod (i used 1.5 mm) to secure the trigger, mag catch, and slide lock. The pin is a tight fit in it's slot so either have tight tolerances or sand or maybe scale the pin down about 5%. The barrel glues onto the body of the glock (there's a little indent for it) and then the slide cover glues onto the barrel (kind of hard to figure out where but i marked on the barrel with a pencil right where the opening for the slide is) You don't have to print the holo template, i used it as a ‘template’ to cut out some packaging plastic, but I'm sure you could also laser cut Any questions let me know! P.S. the aim sight dots are best printed in glow in the dark or contrasting colours.