Gachiakuta Hueforge

Please pay attention to the Transmission Distance (TD) of my filaments so you can use a filament of similar TD to get similar results. Gachiakuta is a Japanese manga made and illustrated by Kei Urana, Hideyoshi Andou contributed to the series as the graffiti designer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 183.17x220mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: PLA+ Inland Black Transmission Distance: 0.3 PLA+ Inland Dark grey Transmission Distance: 1 PLA+ Inland Grey Transmission Distance: 2 PLA+ Inland White Transmission Distance: 2 PLA+ Inland True Red Transmission Distance: 2This print uses 5 unique filamentsNo-AMS:Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark grey At layer #10 (0.88mm) swap to Grey At layer #13 (1.12mm) swap to White At layer #15 (1.28mm) swap to Iron Red for the rest.