GAEM Soldering Jig

This is a jig for soldering the electronics for the educational Arduino project, the General Arduino Exploration Machine.

Software for the project can be found here:
https://github.com/kriskeillor/GAEM/

(The folder 03-hardware includes this STL file and, in the near future, will contain KiCad schematic and BOM. When all are uploaded, the project should be easy to assemble from off-the-shelf parts, with a 100% success rate even for beginner hobbyists.)

Basic BOM:
- 1x Arduino Micro

- 2x 17 by 1 female 2.54mm header (standard 8mm height)

- 3x 12mm push buttons (Adafruit part #1009 or #1010)

- 8x 5mm LED
The LEDs in this model have a 1mm thick lip and are 8.7mm tall overall.

- 8 connector wires to control the LEDs.

- 4 resistors to limit the current on the LEDs (resistance will vary by LED color, recommend 6~700 for low-energy LEDs and ~1k for high-energy LEDs).

- 1x Half-Sized Perma Proto Board (Adafruit part #1609)