Thingiverse

Galactus Dummy 13

by Machineberg

17 Downloads

47 Likes

0 Makes

The Devourer of Worlds arrives in miniature—but still massive in presence. This Galactus-inspired Dummy 13 pays tribute to the cosmic titan that appears in the upcoming Fantastic Four reboot. With towering headgear, this is a must-have for any Marvel or Dummy 13 fan.

🔧 Features:
- Oversized Galactus helmet with cosmic crown ridges meant to go with your Dummy 13
- Designed for easy, support-free printing
- STL and 3MF included
⚠️ Notes:
- This is a fan-made tribute based on the 2025 Fantastic Four film. Not officially licensed. Model scales well with other Marvel-themed Dummy 13s or for cosmic display shelves.

🙏 Support the Maker:
- Enjoy this model? Consider leaving a tip or tagging your print! I spent >10 hours designing this model & print profile.
💸 Venmo: @Machineberg (https://venmo.com/u/machineberg)

🪐 Tag “Machineberg” so Galactus can admire your world... before devouring it.

Action Figure action figures Articulated figure dummy 13 dummy 13 accessory dummy model dummy13 fantastic four FANTASTIC4 fantasticfour figures galactus marvel marvel comics marvel studios Marvel Universe mr fantastic The Fantastic Four

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

print-in-place design · no supports · very large print

Support-free Print-in-place May need scaling or splitting

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, Polycarbonate

Min. bed size

300 mm (Extra large)

Est. print time

10 h

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Machineberg also publishes on

13 additional models across 2 more platforms

Frequently Asked Questions

Which 3D printer is suitable for Galactus Dummy 13?

Any FDM printer should handle Galactus Dummy 13 just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does Galactus Dummy 13 need supports when printing?

Nope — Galactus Dummy 13 is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Galactus Dummy 13?

According to the design notes, Galactus Dummy 13 takes approximately 10 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Galactus Dummy 13 available in?

Galactus Dummy 13 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Galactus Dummy 13 free to download?

Yes, Galactus Dummy 13 is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Galactus Dummy 13

Similar Models

Add to Collection