Galarian Zigzagoon and Obstagoon

My son roped me into making this. Pokémon, which I didn't know, so I had to get started with Hueforge and make it, because there wasn't another one already made, and while I was at it, I made its evolution, Obstagoon, too. You can modify the width and height, but don't change the depth. In fact, I adapted it to 200x200, which is the most standard size for Hueforge Project: Zigzagon y Obstagon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 113.72x107.14mm in size (this was the roiginal)You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm I used Smartmaterials filaments to pink, white, dark grey, and black This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray (o blue gray from Bambu) At layer #17 (1.44mm) swap to White At layer #25 (2.08mm) swap to Black At layer #29 (2.4mm) swap to Pink At l