GameBoy Camera to C/CS-Mount

⚠ Read the disclaimer at the end ⚠

The whole assembly can be reverted back to the original camera. No actual camera parts need to be damaged/manipulated
This adapter requires 6x M2 screws and 6x threaded inserts which get glued into the printed model.

Parts required:
2x screw M2x4
4x screw M2x8
6x Washer
2x insert M2x4x3.5
4x insert M2x8x3.5
1x CS/C-Mount-Adapter (this 5mm spacer acts as the actual threads your lens gets attached to)

You might want to get a second of the adapter rings to be able to use C-Mount lenses.

There are two separate .stl attached. One comes with pre-modeled supports which made it possible to me to print in resin without any further structures. I've been using an Anycubic Photon S

Assembly:
Glue the threaded inserts into the model using some strong epoxy. Take care not to get glue into the threads.
Glue in the CS/C-Mount-Adapter. Take care not to get glue into the threads.
Disassemble your camera and keep all parts in case you want to revert back to the ori