Thingiverse

GameCube Controller Adapter Caddy For Grid Wall

von CellJrBodyWash

0 Downloads

0 Likes

0 Makes

This is designed to be compatible with a remix I made for smysnk 's GameCube controller wall mount. After making the universal hooks to mount my controllers I wanted to make it compatible with the adapter. There are through holes on the front side to allow a screw driver to be used to combine the two parts. I'm using 0.8" Fireboard screws but as you can see they are not optimal. Something about half that length would be a better fit. There are also holes in the bottom so that the adapter can be oriented 180 degrees in either direction.

GameCube gamecube adapter gamecube adapter mount gamecube controller grid Grid wall grid wall hook grid wall mount gridwall gridwall connector gridwall hook nintendo gamecube

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

GameCube Controller Adapter Caddy For Grid Wall

Ähnliche Modelle

Zur Sammlung hinzufügen